mmmm what provider are you trying to get it to work for again?
ESN Change Method for HTC Touch / Vogue
- Thread starter D/\SH
- Start date
mmmm what provider are you trying to get it to work for again?
I am a Sprint user. I am using my old razr (Sprint) and cloning that esn on the touch (also Sprint). I can make and receive calls fine. Caller ID comes over as the razr so I am know it is working, just not the internet. You have some ideas????
-T
crazaytalent
Registered
So u r receiving service on the touch, just no data? And I am assuming u have data on ur plan ,of coarse? Have u tried installin a DCD carrier cab?
have you tried to manually make a new connection using #777?
Crazatalent,
Hey thanks for the reply. Yea, I used it last night to make a few test calls (Yes the other phone was off and no battery in it while testing) and it works fine. Yes I also have a data plan. No I haven't installed a DCD carrier cab. Only thing I did was the esn write that was written by Shadowmite that Dash listed above. I am a NOOB so bear with me if I sound like I don't know what I am doing (I'm learning but far from actually knowing .. so I guess that is the first step...hahaha).
I wouldn't think that I would need to run the carrier cab because both phones were already active on Sprint accounts (not a verision switch over. It (razr and touch) were purchased from Sprint). The Touch (now using the razr esn) has sprint service and the sprint rom on it, wm6.1. It was used by someone else and now it has a bad esn or used to have a bad esn until I did the esn clone (previous owner of touch didn't pay his bill(s) so it was blacklisted until he pays up).
Do you think this could be my answer? I just went to ppcgeeks and found a thread that had a DCD for sprint that is dated 1-16-09. Let me know what you think. I am going to kick myself if that is all that was needed!
Thanks again,
-T
--------- New Post Merged on 23/2/2009 at 11:04:01 --------
No I didn't try that. I flashed to the new rom before and again after I did the esn swap (just wanted to make sure everything stuck and didn't default back to the old esn). Thing is I never changed a user name and password. Does Sprint fill that in automatically. I can't remember??? I think it still has the old @sprintpcs.com account info. Wonder if there is a way to clear that all out then try and connect as if it was new out of the box.
-T
Last edited:
crazaytalent
Registered
Id try and make a new connection through #777 as dash suggested, and if it's still not working, then go ahead and install the carrier cab... as for everything else, I think your overthinking it.... neither of those options should make your situation anyworse...
Alright I made a new connection and did the DCD cab. No luck. Still getting the 67 error. My head hurts I am over thinking this that much...hahaha Still think it has to do with the username/password because I never changed anything with that. I went in and tried changing the username using ##DATA# but no where does it allow me to change the password. Also wondering if it has something to do with the fact that this was a razr and this is a touch. Wonder if they sign in to the sprint server differently and since sprint thinks this is a razr that this may be my problem.
Has anyone ever done this successfully? The way I am?
Thanks!!
-T
its been done many times..... an esn is an esn and wont matter if it came from a smartphone, ppc, or java based phone..... as long as it is from the same provider you are good.... i dont know what else could be causing it than besides the settings under ##778# being out of tweak or something..... but never heard that on a vogue before.
I was wondering if someone could help me out. I finally got a free minute to try and get the internet working on this phone and still nothing. Phone is working great using the donor ESN but no internet. Here is what I've got:
- Sprint Razr (donor ESN phone) and Sprint Touch (Had bad ESN now has Razr ESN).
- Have Data plan on my Account.
- Did the changes from the original post and phone works fine (can make and receive calls)
- When I try and connect to the internet it gives me error 67, can not connect #777 and 1012 error.
What I have tried:
- Start/settings/services/internet/get settings/ and start IOTA.
- Tried making a new connection under start/settings/connections/connections and setup a new #777 connection.
- Changed Active Profile from 0 to 1 in ##3282#
None of this worked. Under ##3282# my settings are:
User Name:
Active Profile - 1
MIP_MODE - Mobile IP Only
User Name - (My Username)@sprintpcs.com
SPI MN-HA - 4D2
SPI MN-AAA - 4D2
ReverseTunnel Pref - Enable
Home Agent IP Address - 0.0.0.0 (for some reason it will not let me edit this setting)
Primary Home Agent - 0.0.0.0
Second Home Agent - 0.0.0.0
HA Shared Secret (HEX) Blank
AAA Shared Secret (HEX) Bunch of characters
Advanced:
ESN - Donor ESN (From Razr)
MSID - My Phone number
Not sure if any of this makes sense. I am just trying to get the internet working. Please let me know if anyone has any ideas. It does say "Preparing vision services" when I try to connect to the internet but always fails with error 67 Username and/or Password incorrect. Also get Cannot Connect Dialed #777. Also get error code 1012 could not prepare Vision services please try again later.
Thanks very much in advance for the help!
-Tony
- Sprint Razr (donor ESN phone) and Sprint Touch (Had bad ESN now has Razr ESN).
- Have Data plan on my Account.
- Did the changes from the original post and phone works fine (can make and receive calls)
- When I try and connect to the internet it gives me error 67, can not connect #777 and 1012 error.
What I have tried:
- Start/settings/services/internet/get settings/ and start IOTA.
- Tried making a new connection under start/settings/connections/connections and setup a new #777 connection.
- Changed Active Profile from 0 to 1 in ##3282#
None of this worked. Under ##3282# my settings are:
User Name:
Active Profile - 1
MIP_MODE - Mobile IP Only
User Name - (My Username)@sprintpcs.com
SPI MN-HA - 4D2
SPI MN-AAA - 4D2
ReverseTunnel Pref - Enable
Home Agent IP Address - 0.0.0.0 (for some reason it will not let me edit this setting)
Primary Home Agent - 0.0.0.0
Second Home Agent - 0.0.0.0
HA Shared Secret (HEX) Blank
AAA Shared Secret (HEX) Bunch of characters
Advanced:
ESN - Donor ESN (From Razr)
MSID - My Phone number
Not sure if any of this makes sense. I am just trying to get the internet working. Please let me know if anyone has any ideas. It does say "Preparing vision services" when I try to connect to the internet but always fails with error 67 Username and/or Password incorrect. Also get Cannot Connect Dialed #777. Also get error code 1012 could not prepare Vision services please try again later.
Thanks very much in advance for the help!
-Tony
chelsyhoyle2004
Registered
Prerequisite
1. The Phone should have 2.31.Coke Bootloader Hard SPL MFG
2. Radio of Phone should be 3.** Any Radio with GPS my Prefered is 3.35 from Sprint
ImCokeMan have Release HardSPL MFG Verison for 6900 which is 2.31.Coke SPL this SPL along with alltel 3.37 Radio can be used to SupeCID 6900 for Making the Device Security Level Zero the Way we did it for 6800.......
I have hound that website n this is what is says to do i dunno how to even do that sorry im dumb can someone please walk me through the process plz :viannen_07: Thanks
--------- New Post Merged on 7/3/2009 at 06:00:38 --------
oh and by the way im through alltel i dunno if that would make any difference i have a lg esn i wanna use for my touch that has a bad esn......Thanks
1. The Phone should have 2.31.Coke Bootloader Hard SPL MFG
2. Radio of Phone should be 3.** Any Radio with GPS my Prefered is 3.35 from Sprint
ImCokeMan have Release HardSPL MFG Verison for 6900 which is 2.31.Coke SPL this SPL along with alltel 3.37 Radio can be used to SupeCID 6900 for Making the Device Security Level Zero the Way we did it for 6800.......
I have hound that website n this is what is says to do i dunno how to even do that sorry im dumb can someone please walk me through the process plz :viannen_07: Thanks
--------- New Post Merged on 7/3/2009 at 06:00:38 --------
oh and by the way im through alltel i dunno if that would make any difference i have a lg esn i wanna use for my touch that has a bad esn......Thanks
Last edited:
I can help answer your questions if you are a little more specific. I am really just learning this stuff myself so please remember that I am by no means a expert. I have been able to get the phone working, but not the internet. I am sure it is something dumb that I have overlooked but nothing yet.
Let me know what questions you have and I'll try and help.
The hard part for me was mtty. Looking back it really wasn't a big deal when I read the instructions better.
Let me know if I can help.
-T
chelsyhoyle2004
Registered
when u go on the website that the owner provides which is ***removed*** ! Once i go there i have no idea where to start i just need someone to walk through the whole process with me !!! sorry i just dont understand so will u start at the beginning n help me ....i would very much appreciate it....Thanks:glasses1:
--------- New Post Merged on 8/3/2009 at 04:57:39 --------
Can someone please help me change my esn for my touch im gettin charged for a data plan n dont have a data phone because i cant figure out how 2 change the esn number so i can use my touch!! :connie_mykilroy: Thanks
--------- New Post Merged on 8/3/2009 at 04:57:39 --------
Can someone please help me change my esn for my touch im gettin charged for a data plan n dont have a data phone because i cant figure out how 2 change the esn number so i can use my touch!! :connie_mykilroy: Thanks
Last edited:
I am not sure what you're talking about. I just went to the website that Dash listed in the first post here and it works for me. I will be more then happy to help you if you are having problems with a particular step in the directions provided. To "walk" you through it would be kind of hard. The directions are pretty straight forward (sorry hope that doesn't sound mean!).
Which part are you having a problem with. Make sure you get ImCokeMan's program loaded first onto your Touch (link is provided). It has to be placed into security level 0 before you can start making the changes. I didn't use the Alltell ROM. I just used Sprints latest one for the Touch. You could flash to the Alltell then back to Sprint if you want but I didn't.
Give it a shot and just work through his directions. They are really pretty good.
-T
chelsyhoyle2004
Registered
So i need to download these to programs to my phone:
SPL Version Require is Vogue_unlocker_MFG_2.31.exe
ROM Required is (Only this Radio is Compatible with HardSPL for SuperCIDing)
......and do i download them by usb port?
--------- New Post Merged on 8/3/2009 at 05:44:32 --------
Yay i think i might have figured out the first step lol im stupid
SPL Version Require is Vogue_unlocker_MFG_2.31.exe
ROM Required is (Only this Radio is Compatible with HardSPL for SuperCIDing)
......and do i download them by usb port?
--------- New Post Merged on 8/3/2009 at 05:44:32 --------
Yay i think i might have figured out the first step lol im stupid
Last edited:
I just did a quick google search for Vogue_unlocker_MFG_2.31.exe . There are tons of hits from other sites and a bunch on our site AMJ. Just make our/your search button your friend or use google. I know it takes a bit to figure out how get around here but you'll get the hang of it :specool:
Anyway here some easy directions for the unlocker program that I found:
1) Connect your phone to your computer and establish an ActiveSync connection.
2) Run the Vogue_unlocker_MFG_2.31.exe on your computer and follow all of the prompts (including when to disconnect the USB cable and reconnect).
3) After you get into Windows, do the Power-Camera-Reset to get into ImCokeMan's Bootloader (the rainbow screen).
4) Run the Alltel ROM exe file (follow all prompts).
-T
you can use this to learn to navigate the site
https://www.androidmobilejunkie.com/showthread.php?t=181534
chelsyhoyle2004
Registered
well i gotta charge my battery up its not got enough charge the computer says:connie_mykilroy:
--------- New Post Merged on 8/3/2009 at 06:14:15 --------
Im gonna have to charge my battery for a while but once i get to the step with mtty.exe what do i do i have already downloaded the program???? I promise i will quit buggin you soon
....thanks
--------- New Post Merged on 8/3/2009 at 06:14:15 --------
Im gonna have to charge my battery for a while but once i get to the step with mtty.exe what do i do i have already downloaded the program???? I promise i will quit buggin you soon
....thanks
Last edited:
well i gotta charge my battery up its not got enough charge the computer says:connie_mykilroy:
--------- New Post Merged on 8/3/2009 at 06:14:15 --------
Im gonna have to charge my battery for a while but once i get to the step with mtty.exe what do i do i have already downloaded the program???? I promise i will quit buggin you soon
Just run the program. Make sure you have the proper drivers (you should if you have activesync installed. Click on my computer then go to device manager and find out which com port your touch is using. Select that com port and enter the commands that are listed in the instructions. I believe it is steps 7 thru 14. Make sure it is in the bootloader state.
-T
p.s. Just know that doing all this could really mess up your phone. It could mess it up to the point that you can't use it anymore. I am by no means an expert at this, actually far from it. I am still stuck myself on getting my internet to work on the phone. So.....if things go bad for you I probably won't be able to help you fix it. Not that I wouldn't lend a helping hand, it's just because I am learning this stuff myself.
Good Luck!
chelsyhoyle2004
Registered
I dont know whatz wrong with it but everytime i try to load the unlocker is shows up the error code...........ïµ ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
How can i fix this or how else can i unlock it ????
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
How can i fix this or how else can i unlock it ????
dman all those errors? are you trying to run it on a 64 bit operating system? and you can use winrar and extract the contents of the unlocker and you will find a .nbh file in there. take all the other files but the nbh and throw them in your recycle bin. than take the nbh and rename it to VOGUIMG.nbh and place that on a FAT32 formatted 2 gig card or less (you will lose all data on the card so back up or use backup card) than place the phone in manual bootloader by pressing and holding the power and camera buttons while soft resetting. a screen will than appear and just follow the steps to unlock your device. let me know if this works for you but i have done this many times since the vogue hardspl aka unlocker wont run on 64 bit systems :sad: