What's new
AMJ Bulletin Board

[RELEASE] Garmin Mobile XT for Windows Mobile software version 50020w

K

kaos

SR Admin
Garmin Mobile XT for Windows Mobile software version 5.00.20w
20081114_220359_0015_111b.jpg
20081114_215124_0009_111b.jpg
20081114_215803_0013_111b.jpg
20081114_215325_0010_111b.jpg


Requirements: Windows Mobile 2003/SE/WM5/WM6 PocketPs with GPS receiver
Overview: Add full-featured navigation to your GPS-enabled smartphone with Garmin Mobile XT. Just plug this data card into your compatible phone (see specs tab) and start navigating. With no monthly fees, preloaded maps, turn-by-turn directions, real-time services and only $99, this easy-to-use data card has everything you need to navigate to the front door.

Notes:

* The Garmin Mobile XT for Windows Mobile software is designed for use on Microsoft Windows Mobile Pocket PC and Smartphone devices.
* You must have a previous version of the XT software installed on your SD card to have all of the help files, voice files and basemap files. These are not included with this update.
* During installation, you will be prompted to turn on your GPS device.
* A minimum card size of 256 MB is recommended for Garmin Mobile XT software with maps.
* If you have previously installed the Garmin Que for Pocket PC application, you must uninstall Garmin Que before installing the Garmin Mobile XT application.
* If you are updating from version 4.10.40 or earlier, you may encounter a new input screen the first time you start the application after the update. If you have a Garmin GPS receiver, select the appropriate link to connect to the receiver.

Change History
Changes made from version 5.00.10 to 5.00.20:

* Update the subcategories listed for City Navigator Europe 2009 maps.
* Correct various out of memory conditions that can occur.
* Correct the processing of a received Location Message to not save the point on the Recent Finds list.
* Correct the processing of received text messages to not close the GMXT application when a text message is received without a subject.
* Correct an error that occurs when a headset is plugged into some devices.
* Correct the use of the directional pad for movement between hyperlinks within Flight Status.
* Correct saving and editing waypoints with non-English characters.

Changes made from version 5.00.00 to 5.00.10:

* Correct My Locations list to display the last item on the list.
* Correct display of the Estimated Departure Time within Flight Status.
* Correct various Google Local Search and Panoramio language issues.
* Correct Google Local Search to return to the correct previous page when selecting 'Back'.
* Correct Panoramio display so that it doesn't wrap back to the first item after reaching the end of the list.

Changes made from version 4.xx.xx to 5.00.00:

* Update the look and feel of the Garmin Mobile XT application.
* Add new Garmin Online feature - Google Local Search.
* Add new Garmin Online feature - Panaramio photos.
* Add new Garmin Online feature - Flight Status.
* Add Speed Limit display to the View Map.
* Add ability to install and display custom vehicle icons.
* Modify 'Peerpoints' feature name to 'Location Message'.


More Info:
Code:

http://www8.garmin.com/support/collection.jsp?product=010-00579-00

Download Instructions: All credits for the keygen go to JetMouse, as well as Lord Yuz and starix who helped with the creation of the keygen.

Code:

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_5.00.20w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_5xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_5xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.unl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.

Garmin Mobile XT for Windows Mobile software version 5.00.20w as of September 23rd, 2008

Download:
http://rapidshare.com/files/163886949/babys_First_Poop.rar

passowrd
kaos@AMJ

you can get vehicle icons here
http://www8.garmin.com/vehicles/bundles/allvehicles.html


On a side note!!!
This works on Touch Pro Perfect..All Screen Shots Are Off My Pro.
 
Last edited:
please dont shoot me for being a noob.. but will this work on a mogul flashed to cricket? i know it relies on some sort of connection just dont know if cricket is capable of this. again sorry asking possibly a dumb question.
 
slick78 said:
i have version 4.20.30wp, what is the best way to update to the new version?
Click to expand...

i coneected my phone to pc...draged over folder for garmin to pc...then uninstalled garmin from phone....then installed new...then i took old folders contents...like the swl file voice help i think two others that wern't in new one...dropped in rebooted and worked fine....
 
since i have internal gps i dont need an external receiver do I? only reason i ask is cause it says scanning attatched but the process bar just sits at like a quater done for ever.
 
D/\SH said:
yes this will work fine with the internal one.
Click to expand...
good deal, any ideas what i'm doing wrong? do i need to registor first in order to connect to the garmin sever?

--------- New Post Merged on 24/11/2008 at 09:15:36 --------

I'm having trouble getting the product key, placed the sw.unl file in the garmin folder, pulled card soft reset and from there not sure how to get the key....it's probably easy as hell, must be missin it.
 
Last edited:
Taylor said:
good deal, any ideas what i'm doing wrong? do i need to registor first in order to connect to the garmin sever?

--------- New Post Merged on 24/11/2008 at 09:15:36 --------

I'm having trouble getting the product key, placed the sw.unl file in the garmin folder, pulled card soft reset and from there not sure how to get the key....it's probably easy as hell, must be missin it.
Click to expand...

kaos tells you the step by step process in post #6
 
Just as a heads up, if you begin to have problems trying to install this thing from scratch, delete all of your mms and sms messages and you should be fine. Took me 3 days to figure this out. Nice find BTW AMJ.
 
Kaos... you are killing me man... after installing your take 5 rom today I went to reinstall garmin and found this... works like a charm... AWESOME!!!!!

big thanks to you brother..
:yourock:
 
livinlifes2shor said:
when i use the key gen it gives me a long key and garmin only request a 6 digit key??
Click to expand...

you must not have read any part of how to install it? the key should be placed in a file named sw.unl & saved in the storagecard/garmin directory & garmin will not ask for any keys.

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_5.00.20w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_5xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_5xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.unl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.
 
OK I feel like a total noob asking this. This is the 1st time I've tried to use this program( Been a sprint nav fan) So I started the install and as the instructions said to connect to the Garmin GPS and thats where I'm @ now it will not leave this screen it keeps saying scanning bluetooth and scanning attachments and before any says anything yes I did restart after the install
 

Attachments

its been ages since i've installed it the first time, once you do its always on your storage card & you just "re-initialize" it to get your icons back. but back to your question, if i remember right you just do what you can to get out of that screen so you can get to the unit id screen & crack it. if for some reason garmin cant connect i want to say try loading google maps or live search with the gps on & then leave one of them open while starting garmin. this should keep the gps active so garmin can talk to it the first time. like i said its been ages since i originally installed it, so i'm simply going from my memory, which can be a bit hazy lol
 
just cancel while it is searching all you need is the unit id for the keygen. once you get the key. open notepad on your desktop copy the key and save as sw.unl then place that into the garmen folder on your phone. you dont need to connect to anything once you have that unit id for the keygen you can close garmin. after the .unl file is in place you can restart garmin and it will work. load your maps and your ready to roll...
 
You must log in or register to reply here.
Back
Top