What's new
AMJ Bulletin Board

Touch Pro (Raphael) HSPL Unlocker And Relocker (CDMA ONLY)

crazaytalent said:
It's saying unlocked AFTER you run the relocking process? Does the relocked process run thrugh all the steps, and give 'you a sucessfully relocked-clcik finish to complete window?'
Click to expand...

i followed all the steps. once i clicked finish it restarted my phone. then when i check if its lock still says unlock.

--------- New Post Merged on 9/2/2009 at 07:41:02 --------

whogivsafuq said:
i followed all the steps. once i clicked finish it restarted my phone. then when i check if its lock still says unlock.
Click to expand...

ok i finally flashed my phone back to stock rom. i guess its already lock even though it says unlocked.
 
Last edited:
whogivsafuq said:
i followed all the steps. once i clicked finish it restarted my phone. then when i check if its lock still says unlock.

--------- New Post Merged on 9/2/2009 at 07:41:02 --------



ok i finally flashed my phone back to stock rom. i guess its already lock even though it says unlocked.
Click to expand...

you will want to relock your pohne so it says locked if you are on stock...... or you can keep it unlocked like it is now and flash a custom rom following the tutorial below in my signature.
 
I need a little help from the experts please:) I just got my Pro today from Alltel and am attempting to unlock it to flash to a new rom. I run the Raphael_CDMA_HSPL_037 and all seems well till it gets to the % screen. It then sits there on 0% for a bit then zips to 100% giving an error "324: Invalid command".. I know I've done everything correct from the given directions. So what could else could I be doing wrong??? My boot loader screen shows:

Security Unlocked

RAPH800 MFG
SPL-0.25.C-SSPL
MicroP-Raph (LED) v0C85
MicroP-Raph (KEY) v0685
PSOC-Raph STAGE_EVT v20
 
njkid32 said:
I need a little help from the experts please:) I just got my Pro today from Alltel and am attempting to unlock it to flash to a new rom. I run the Raphael_CDMA_HSPL_037 and all seems well till it gets to the % screen. It then sits there on 0% for a bit then zips to 100% giving an error "324: Invalid command".. I know I've done everything correct from the given directions. So what could else could I be doing wrong??? My boot loader screen shows:

Security Unlocked

RAPH800 MFG
SPL-0.25.C-SSPL
MicroP-Raph (LED) v0C85
MicroP-Raph (KEY) v0685
PSOC-Raph STAGE_EVT v20
Click to expand...

no you are not unlocked....... and have you tried to reboot your computer and try again? also what os are you on and what version of activesync or device center are you using? have you tried to redownload and try again?
 
D/\SH said:
no you are not unlocked....... and have you tried to reboot your computer and try again? also what os are you on and what version of activesync or device center are you using? have you tried to redownload and try again?
Click to expand...

Ok, I got it to load the SPL-0.37 to load successfully. Now, I tried to load Conflippers TP rom and I was getting errors and now the damn thing is stuck at the Touch Pro boot screen.

I am using Vista x86 and am up to date with everything as said in this thread.

Now, in my bootloader screen it says at the bottom Upgrade Rom code error Please try again.... Never seen this before:(
 
njkid32 said:
Ok, I got it to load the SPL-0.37 to load successfully. Now, I tried to load Conflippers TP rom and I was getting errors and now the damn thing is stuck at the Touch Pro boot screen.

I am using Vista x86 and am up to date with everything as said in this thread.

Now, in my bootloader screen it says at the bottom Upgrade Rom code error Please try again.... Never seen this before:(
Click to expand...

why not try to flash form the card.... your pc has some troubles you might want to check on if you keep getting errors..... i have ran this on both xp 32 and 64 bit as well as vista 32 and 64 bit.......also have you checked your firewall and your virus scan to make sure they arent blocking you from being able to flash?
 
i suggest you flash through sd card as i was having the same problems with my laptop and kept trying and trying with no success...besides flashing through sd card is the easiest way to go :)
 
D/\SH said:
why not try to flash form the card.... your pc has some troubles you might want to check on if you keep getting errors..... i have ran this on both xp 32 and 64 bit as well as vista 32 and 64 bit.......also have you checked your firewall and your virus scan to make sure they arent blocking you from being able to flash?
Click to expand...

I figured it out lol.. For some reason my phone wont flash if I have any other active usb devices going. I have a usb modem for my net and when its connected and running my phone gives errors while flashing (tried on 2 fresh installs of windows). So, I unplugged all my usb devices and rebooted then I was able to unlock and flash a new rom.

Thanks for your input and help!
 
xxdbkxx said:
OK, so I went into bootloader. It says:

Security Unlocked
RAPH800
SPL-0.37.0000
Micro-P-Hermann (LED) v0C85
Micro-P-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20

USB


When you said try again, I assumed you meant to try the unlocker (Raphael_CDMA_HSPL_037.exe) again. I did, I got the same AthenaWrapper error.
Click to expand...

The reason you're most likely getting the AthenaWrapper error is, because you are trying to run the program within the zip file you downloaded. Either UnZip or copy and paste from inside the zip and release it out. Mainly get the files outside of the zip and then run... you should be good to go then. Good Luck
 
It took me a long time to do this. Finally figured out I actually had to uninstall my antivirus completely. Kept getting 262 errors. After that it worked (well after it reset my computer during flash) I left the TP at the flash screen though and restarted the Hard SPL flash from there and it took it just fine. Just FYI for anyone who runs AVG you may have to completely uninstall it to get rid of all its background processes (kill them and the just restart)

Thanks for the program!
 
lacanfeisxn said:
It took me a long time to do this. Finally figured out I actually had to uninstall my antivirus completely. Kept getting 262 errors. After that it worked (well after it reset my computer during flash) I left the TP at the flash screen though and restarted the Hard SPL flash from there and it took it just fine. Just FYI for anyone who runs AVG you may have to completely uninstall it to get rid of all its background processes (kill them and the just restart)

Thanks for the program!
Click to expand...

i run the pay version of avg and dont have any troubles... its just how you set it up with ewhat it blocks and what it doesnt.... takes a little bit of time to get set the way you want but well worth it :>
 
My actual 5 row keyboard stopped working and I'm probably going to have to get another TP, should I re-lock my phone and go back to stock before I turn it back in, since im running Mighty's Rom, or can I just turn it back in?...(hopefully I posted in the right area since im going to attemp to re-lock my phone if needed) =) appreciate all the help in advance fam
 
jsgeezie said:
My actual 5 row keyboard stopped working and I'm probably going to have to get another TP, should I re-lock my phone and go back to stock before I turn it back in, since im running Mighty's Rom, or can I just turn it back in?...(hopefully I posted in the right area since im going to attemp to re-lock my phone if needed) =) appreciate all the help in advance fam
Click to expand...
I ALWAYS recommend going completely back to stock when your going to be returning a phone. Better safe then sorry.
 
jsgeezie said:
My actual 5 row keyboard stopped working and I'm probably going to have to get another TP, should I re-lock my phone and go back to stock before I turn it back in, since im running Mighty's Rom, or can I just turn it back in?...(hopefully I posted in the right area since im going to attemp to re-lock my phone if needed) =) appreciate all the help in advance fam
Click to expand...
pop the phone in the microwave for a few seconds....fry that shit...take it in an get a new one....DING!
 
What's going on fam.. im trying to relock my phone and it isn't saying locked in bootloader screen... what exactly are the steps i need to take.. i tried to get an activesync and just do it like that and it loaded up and everythign and all that but it still says unlocked.. can somone please give me step by step how to do it and what exactly should it say in the bootloader cus i gotta give the phone back to sprint and they're gonna give me a new joint... appreciate all the help in advance...
 
jsgeezie said:
What's going on fam.. im trying to relock my phone and it isn't saying locked in bootloader screen... what exactly are the steps i need to take.. i tried to get an activesync and just do it like that and it loaded up and everythign and all that but it still says unlocked.. can somone please give me step by step how to do it and what exactly should it say in the bootloader cus i gotta give the phone back to sprint and they're gonna give me a new joint... appreciate all the help in advance...
Click to expand...

if you are trying to re-lock your pro, then it WONT say unlock at the top. thats hust default on the pro's. if you ran the re-locker you are ok.
 
josamu said:
if you are trying to re-lock your pro, then it WONT say unlock at the top. thats hust default on the pro's. if you ran the re-locker you are ok.
Click to expand...

so if i run the unlocker it "wont" say unlocked at the top of the phone in the bootloader screen?.. what u said is kinda confusing.. and im asking someone to go over the steps for me to re-lock my phone, am i suppose to put the phone in bootloader mode first then run the relocker, or just activesync it and run it... cus i ran it just by activesyncing it and it still says unlocked at the top of the bootloader screen.. and i think u said that it always says unlocked because how the the pro's always say it as default?.. lol.. im lost

.. ok i just tried to relock it again and it went through all of the stages and said it was finished and my phone reset so hopefully that will do it.. so what will it say if it's re-locked?
 
Last edited:
You must log in or register to reply here.
Back
Top